How To Update Samsung Galaxy Fit Into android 2.3.4 Gingerbread

Updated 24 May, 2013, 7:53 pm IST

Wednesday August 10 11:30 am

How To Update Samsung Galaxy Fit Into android 2.3.4 Gingerbread

password is samfirmware.com DOWNLOAD THE WHOLE PACKEGE AND ODIN HERE -- http //adf.ly/7BooV http //www.samfirmware.com/WEBPROTECT-s5670.htm 1.Download the Gingerbread 2.3.4 update package for Samsung GALAXY FIT in your computer from here and as soon as you download it you will have to unzip to folder to get the files like Boot, CODE, Modem, CSC along with the Odin Multi uploader v 4.38. Please note that even if a single file is missing then it means that the files have not been downloaded properly and again you need to download them. 2. So, after downloading and in the extraction process if it prompts you to enter the password at any point of time then you will have to enter the password as "samfirmware.com" . 3. After this, just open the "Odin Multi Downloader v4.38" file from the extracted folder and then you will have to now turn the phone Off as you will have to turn your phone ON in the download mode. 4. Please note that the download mode can be entered by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device. Now, if you have successfully entered into the download mode then you will see a green screen . Please note that if the device boots in the normal mode with the home screen then retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone. 5. Now, as soon as you get into the download mode, you will have to connect the Galaxy FIT S 5670 to the computer with the help of USB cable while Odin opened in the desktop. As soon as you connect the phone, you will see that first ID COM box as shown below will turn yellow and in the message box you will see that it will show ADDED and after that you will have to add the files respectively as shown below, OPS -- BENI v1.0.ops, BOOT -- APBOOT S5670XXKPI CL260612 REV01 user low true.tar.md5, Phone -- MODEM S5670XXKPI CL260612 REV01.tar.md5, PDA -- CODE S5670XXKPI CL260612 REV01 user low true.tar.md5, CSC -- CSC S5670SERKPI CL260612 REV01 user low true.tar.md5, 6. As soon as you feed in the files, you will have to double check the same and then you will have to proceed and click on the "Start" option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes. 7. After the Galaxy FIT reboots, you will have see the home screen and then choose the options accordingly and then after you see the home screen and after the completion of Media scanning, you will have to go in the recovery mode wherein you will have to delete the cache memory so that all unwanted files are removed if there are any left in the phone. That's it you have now successfully flashed your phone with the latest Android 2.3.4 update. AFTER REBOOT FACTORY RESET YOUR PHONE...AND ENJOY..!!! Do me A favour by visiting this link http //bit.ly/tHBtgo Visit our site http //www.droideagle.com/ DON'T FORGOT TO SUBSCRIBE ME :)